News
News
- What is a sacrificial anode
- Basic requirements for reference...
- What does the reference electrode do...
- Why are zinc blocks attached to the ...
- What is the principle of impressed...
- What material does metal structure...
Contact
Phone:18739187123
hotline:0391-7588881
E-mail:970512272@qq.com
Address:Wuzhi County, Jiaozuo City, China
Industry News
What is the cathodic protection test pile
- Author:Libo
- Source:wwww.catfishinglife.com
- Date:2021-06-11
- Click:0
1. Product Introduction
Cathodic protection test pile is used to measure cathodic protection potential, anode output current and grounding in cathodic protection engineering
Permanent test device for cathodic protection parameters such as resistance and insulation flange insulation performance.
The steel tube test pile is beautiful, easy to install, convenient to use, rain - proof, seepage - proof and so on.
2, installation,
All cables are led to terminals through the bottom of the steel pipe of the test pile.
According to the design requirements confirm the buried depth, test the number of cables and wiring mode;
The test pile is buried in the ground, and two reserved holes at the bottom are inserted into PVC fixed poles. The test pile is poured with concrete.
And make sure it's solid and reliable.
3. Matters needing attention
Wiring in strict accordance with the design requirements;
? Each test pile shall be located near the solid foundation of the pipeline and not directly above the pipeline
Fill in the soil layer to prevent subsidence of the geological soil layer from damaging the measuring line in the test pile.
4. Selection guide
model | specifications/mm | The length of the |
Length * width * height | ||
CS1 steel pile test pile | Φ108*4*2000 | 1.5m-3m |
CS2 FRP test pile | Φ98*4*1800 | 1.5m-3m |
CS3 cement test pile | 1200*170*120 | 1.5m-3m |
CS4 multi-function test pile | Φ114*4*3000 | 1.5m-3m |