News
News
- What is a sacrificial anode
- Basic requirements for reference...
- What does the reference electrode do...
- Why are zinc blocks attached to the ...
- What is the principle of impressed...
- What material does metal structure...
Contact
Phone:18739187123
hotline:0391-7588881
E-mail:970512272@qq.com
Address:Wuzhi County, Jiaozuo City, China
Company News
Test pile
- Author:Libo
- Source:wwww.catfishinglife.com
- Date:2021-06-11
- Click:0
For large diameter piles, other methods such as drilling core method (more expensive to detect) and so on can be used.
In conditional engineering, other methods such as drilling and coring can be used to test pile length.
According to the code, low strain is to measure the integrity of the pile, not the length and strength of the pile. The error of pile length is about 1m, and a difference of one or two meters cannot be measured.
If the pile length is less than 20m, it is more accurate. The calculation method is: L = V*t, that is, the length is equal to the pile bottom wave velocity velocity times time.
The accuracy of pile length detection can be improved as long as the operation is standardized, the dry factors of field testing are excluded as far as possible, and some signal data processing methods are adopted.